Product Description

It’s a real pain to move around a race or old car in your shop. They are hard to move by yourself, or you have to get out a floor jack, lift each end and put dollies under each wheel. These GoJaks simply slide in from the side and jack up each wheel using just your foot. This allows you to handle the job fast and by yourself. Easily position locked, blocked, or disabled vehicles with the GoJak Vehicle Positioning Jack Dolly. Use it in your shop, parking garage, or on a tow call. The American-Made GoJak 6313 is an absolute workhorse rated for vehicle curb weights up to 6,300 lbs. and tire widths up to 13 inches. Features include high strength galvanized steel rollers, upgraded 1-3/4″ wide axles, and heavy-duty nylon, double-ball bearing raceway casters. This set up makes for smooth rolling under heavier loads. The GoJak 6313 also has a 5-degree offset pedal for additional foot-to-tire clearance when jacking. Equipped with the largest casters in the GoJak product line allows for increased ground clearance, especially useful when pulling cars up a flatbed. This is the “left hand” version, which is useful if the car is disabled and the front tire is turned at an extreme angle. The foot pedal on the “left hand” GoJak is oriented to point out of the wheel well in this situation. For normal shop use, standard “right hand” units are all you need. Designed, Manufactured, Tested and Proven in the USA since 1984. The Original Self-Loading Wheel Dolly, GoJak® is the only way to roll! For tires up to 13″ wide, 36″ tall. Lifts 1574 lbs. each. Oversize casters for easier rolling. Underframe clearance is increased an additional 2-1/2 inches over the 5000 Series. Very useful when pulling cars up flatbed trucks. Sold each. We recommend the storage rack to keep your investment up off the floor and organized when not in use.Brand:Zendex Tool|Manufacturer Part Number:G6313L|Manufacturer:Zendex Tool Corp.|Assembled Product Dimensions (L x W x H):25.50 x 26.12 x 8.00 Inches