Product Description

1Compared with other similar products, it has an intelligent repair function. And it will automatically turn off when the battery is fully charged. 2When the battery voltage is low, it enters the repair state, and automatically enters the main charging mode after repair. 3When the battery is fully charged, it will automatically check the battery voltage every two hours. If the voltage is low, it will automatically enter the charging mode. 4The output current is as high as 4A, and it is widely used in motorcycles and car batteries. 5When connected to the battery, the battery capacity percentage can be displayed, which is very clear to see.
Item Type: Battery Charger
Material: ABS
Input: 100-240V
Voltage: 12V DC
Charging Current: 4A
Applicable Object: Battery
Charging Time: 10h
Size: Approx. 127x67x37mm/5×2.6×1.5in
5-stage charge mode:
1. Detect battery, won’t work if battery voltage is less than 7.5V. Pre-charge if battery voltage is between 7.5V-11V with half hour maximumly.
2. If battery is still less than 11V, charger will desulfate it for 24 hours with PWM pulse.
3. If battery voltage recover more than 11V, then come into main charge.
4. After charged fully with current less than 0.5A, will come into maintenance.
5. When trick current is less than 200mA, will cutoff charging completely. Sequently it would detect battery every 2 hours, and will pulse recharge battery if battery drops less than 13V.
1 x Battery Charger
1 x US Stardard Cable